I have crosshair v formula z, amd 990fx and sb950 chipset. my computer is ready with array raid 0 with 2 120gb ssd samsung 850 evo. my problem: during the installation of windows 10, i can not load the raid drivers to view the drive and windows can't continue the installation.. Gigabyte have said they are waiting for amd to release the windows 10 drivers for the raid controller of the sb950. i have found the latest catalyst chipset drivers include these, but not the specific pre-installation drivers needed to install the os.. If the existing sata raid array is a bootable configuration with an operating system, then a fresh install of windows 10 will be required. a motherboard bios update is required to support nvme raid. after updating to a supporting bios, the disk configuration must be changed to raid (from sata or ahci)..
I am having issue with getting my nvme raid 0 array in windows 10 install even though i am loading the driver. the raid 0 consists of 2 samsung 970 pro 512 gb nvme drives, mounted on a zenith extreme motherboard flashed with the latest bios firmware.. Hey guys, i'm trying to install my raid drivers for my motherboard (msi a88x-g45) on windows 10. on the msi website the driver will appear if i select my os to be anything but windows 10 (win xp. A guide on how to install windows on a raid setup on amd's ryzen platform. it is a bit confusing to do. download the raid drivers here (this driver will work for all am4 socket motherboards):.